Samsung Digimax U-CA 401 - Manual (Page 15)

15
Connecting to a Power Source
Important information about battery usage
When the camera is not used, turn off the camera power.
Please do not charge the non rechargeable battery. It may cause an explosion or fire.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below 0 ) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
If you are planning to use this camera for long periods of time, it is advisable to use an AC
adapter (5V 2.0A).
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (5V 2.0A) with the correct specification for the
camera. Failure to do so may affect your warranty.
INFORMATION
DANGER
If you have access to a mains supply, using an
AC Adapter (5V,2.0A) allows the camera to be
used for long periods of time.
Plug the adapter into the connection point (DC IN
5V) on the camera.
Remove the batteries when using the AC adapter.
Using the AC power adapter (5V 2.0A)