Samsung Digimax U-CA 401 - Manual (Page 21)

21
LCD monitor indicator
15 Sharpness p.39
16 Image quality p.35
17 Image size 2272, 2048, 1600, 1024, 640 p.34
18 Number of available shots remaining 29
Remaining time (Movie clip/ Voice recording) 00:01:50 / 01:00:00 p.21 ~ 22
19 Digital Zoom rate X4.0 p.25
20 Digital Zoom
21 Voice memo p.26
Starting the recording mode
[ MOVIE CLIP mode ]
S ST TA AN ND DB BY Y
If the memory card is inserted in the camera, all the camera functions apply only to the memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Recording a Movie clip
1. Insert the batteries (p.16). Insert the batteries taking note
of the polarity (+ / -).
2. Insert the memory card (p.19). As this camera has a 32MB
internal memory, you do not need to insert the memory
card. If the memory card is not inserted, an image will be
stored in the internal memory. To expand memory capacity,
insert a memory card. If the memory card is inserted, an
image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP( ) mode by sliding the mode
switch.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press
the shutter button again.
Image size and type are listed below.
- Image size : 640X480, 320X240(Selectable)
- File type : *.avi(MJPEG)