Samsung Digimax U-CA 401 - Manual (Page 50)

50
Protecting images
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
- Slide Show Display Interval: OFF, 1 ~10 seconds
4. Use the UP and DOWN buttons to set whether to repeat
the slide show.
[ON] : Even once a cycle(from the first image to the last
image) is completed, the slide show will continue to
repeat itself.
[OFF]: If a cycle is completed, the slide show will stop
automatically.
5. Press the OK button and the slide show will start.
- To pause the slide show, press the shutter button.
- To start the slide show again, press the shutter button again.
- Press the menu button again and the slide show will stop.
Starting the slide show
MOVE PIC: SET:OK
UNLOCK:
EXIT:SH1
4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK]
: Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can
protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER button,
the Image Protection menu will disappear.
- If you protect an image, the protect icon( ) will be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from [DELETE] or [DEL.ALL] functions, but will
NOT be protected from the [FORMAT] function.
5. Press the shutter button and the menu will disappear.
SLIDE
EXIT:MENU MOVE:
OFF
SLIDE
MOVE: CHANGE:
1 SEC
REPEAT
ON
OFF