Samsung Digimax U-CA 401 - Manual (Page 79)

79
Setting up the application software
17. After restarting the computer, connect the PC to the camera with the USB cable.
18. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open.
If the image viewer program opens, the camera
driver was setup successfully.
19. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful.
Now you can transfer image files from the
camera to PC via the USB cable.
16. To apply changes, you must restart the
computer. Select [Yes, I want to restart my
computer now], and then click [OK].
[Click!]