SIGMA BM-286A User Manual
Page 9
2. INSPECTION AND INSTALLATION page 6
Model BM-286A
2.1.4. Shipping:
Before returning the instrument for any reason, notify TSA Systems of the difficulty
encountered, giving the model and serial numbers of the equipment. TSA will furnish specific
shipping instructions.
2.2. INSTALLATION
The instrument is complete and ready to operate when it is shipped. The touch screen LCD
monitor, stored inside the chamber, must be connected to the NT computer by removing the top
and right side panels. Mount the monitor with the screws provided on the right side and connect
the cables marked 1, 2, and 3 (power, VGA, COM2) to the back of the Windows NT computer
chassis. The optional keyboard is stored next to the computer and can be connected for
data entry. The power cord located on the left side of the unit plugs into a standard 115 volt,
60 Hz ac receptacle. When the instrument is installed at its operating location, the set-up and
operating procedures should be performed as described in General Overview (section 3.1.).