Sekonic L-758DR - Manual (Page 16)

-10-
9. Setting the Measuring and Memory button configuration
In the custom settings mode (refer to P40), the Measuring
button and the Memory button can be set as follows.
1. For Incident measuring
The Measuring button and Memory button is set in the
standard configuration. (Described on Page 1 in Light
Meter Parts) Please make sure that the default value
in the Custom settings mode is set to .(Custom No.17,
Item No. 0)
3. Before Using
2. For Reflected (Spot) measuring
If the standard buttons configuration is inconvenient
for spot metering, the Measuring button and Memory
button can be switched. Set the Custom settings mode
to Custom No. 17, Item No. 1
3. For both Incident/Reflected (Spot) measuring simultaneously
You can set the buttons configuration automatically according to light measuring method. In
incident mode, the buttons configuration is 1), but in reflected mode, the buttons configuration
is 2). For this setting, please set (Custom settings mode No. 17 and Item No 2).
Memory
button Measuring
button Memory
button Measuring
button
Automatically
switched
Configuration 1)
Configuration 2)
Memory
button Measuring
button
Configuration 3)
Memory
button Measuring
button
Reflected Incident