Sekonic L-758DR - Manual (Page 42)

-36-
6. How to use the Exposure compensation function
Exposure compensation can be made in precise 1/10 step increments in a +/- 9.9 EV range. Exposure
compensation may be necessary when compensation for filters, bellows, extension tube, etc is
required.
1. Set the measurement mode (incident light, reflected light) for the desired compensation. You
can make calibration compensation independently for both incident, and reflected light. It is not
possible to switch between measurement modes if the setting is not completed.
2. Making a plus compensation will increase the
exposure. Hold the ISO1 button
and the ISO 2 button
and turn the Jog wheel counter clockwise. The
will appear in the upper section of the LCD screen.
The compensation will change in +0.1 EV steps up to
+9.9.
3. Making a minus compensation will decrease the
exposure. Hold the ISO1 button and the ISO 2 button
and turn the Jog wheel clockwise.
The
will appear in the upper section of the LCD
screen. The compensation will change in -0.1 EV steps
up to -9.9.
6. Advanced Functions
NOTE:
• When making compensations, be sure that it satisfies your needs based on the results
of your digital camera sensor or film be used.
• While incident and reflected light can be set independently, be aware that both ambient
light and flash exposure are corrected uniformly.
• Compensation effects every mode of the meter.
If recalibration has been made for specific purpose do not forget to return to original
zero settings.
Reference:
• When compensation is activate, a plus ( ) or minus ( ) sign as well as the amount of
compensation is displayed continuously on the LCD. You can set custom settings so that
a plus ( ) or minus ( ) sign as well as the amount of compensation doesn’t appear on the
LCD. (See page 40)
• You can also set custom setting so that making a plus compensation results in a decreased
exposure (increasing the value of the aperture or shutter speed value) and making a
minus compensation results in and increased exposure (decreasing the value of the
aperture or shutter speed).