Sekonic L-758DR - Manual (Page 52)

-46-
7. Camera Exposure Profiling
7) Setting compensation value
Rotate the Jog wheel while holding down ISO1
button and ISO2 button simultaneously.
Compensation values can be made in 1/10 step
increments in +/-5.0EV.
8) Setting Clipping point (-)
Rotate the Jog wheel while pressing AVE./
EV button . Clipping point can be set from -7 to
0EV in 1/10 step increments.
9) Setting Dynamic range (-)
Rotate the Jog wheel while pressing MID.TONE
button . Dynamic range can be set from -7 to
0EV in 1/10 step increments.
10) Setting Dynamic range (+)
Rotate the Jog wheel while pressing Memory
clear button @3 . Dynamic range can be set from 0
to +7EV in 1/10 step increments.