Camera exposure profiling, English – Sekonic L-758DR User Manual
Page 51
-45-
ENGLISH
7. Camera Exposure Profiling
2-2 Manual Exposure Profile Input
It situations where it is not possible or convenient to use a computer or the Sekonic Data
Transfer Software, Exposure Profile data can be entered into the L-758DR (L-758D or L-758CINE)
directly. Below is the step by step process for manually entering a specific Exposure Profile.
1) With the meter turned off,enter the Camera Expo-
sure Profile mode by pressing the Power button
while pressing the AVE../
EV button
at
the same time..
2) In the Camera Exposure Profiling mode, the cur-
rent (or preset) contents are displayed.
3) Setting Individual Exposure Profiles (Camera 1, 2
and 3)
Press MID.TONE button
while pressing ISO1
button
to select the desired camera exposure
profile.
4) Setting measuring mode
Rotate the Jog wheel
while pressing the Mode
button
to select measuring mode (ambient or
flash including all flash mode)
5) Setting light receiving method
Turn the Incident/reflected spot selector dial
to
select incident or reflected light.
6) Setting ISO sensitivity
Rotate the Jog wheel
while pressing the ISO1
button
to select ISO sensitivity.