Sekonic L-758DR - Manual (Page 55)

-49-
ENGLISH
2) The EV scale displays Clipping points(+/-),Dy-
namic range(+/-)and Mid. Tone with a triangle
" "icon.
3) Measured value exceeding Dynamic range will
be displayed as a slow blinking " "
icons.Measurements that exceed the clipping
points will be displayed as fast blinking " "
icons.
Reference:
• In the custom setting mode (see page 40), it is possible to select how to indicate the
clipping points and the dynamic range. Below are the three display choices.
7. Camera Exposure Profiling
3-2-3 MID.TONE button
This button is used to set the measured value in the center of EV scale.
1) Take a measurement by pressing the Measur-
ing button
. Press MID.TONE button to
set the Mid.Tone on the scale. ” ” in the
center of the EV scale will blink continuously
twice to indicate that the Mid.Tone has been
set.
Clipping point(-) Clipping point(+)
Mid.Tone
Exceed clipping
point (blinking faster)
Dynamic range(+) Dynamic range(-)
Mid. Tone (blinking)
Exceed dynamic
range(blinking slowly)
Five point Inside Range Outside Range