Sharp PG-M20X - Manual (Page 50)

46
Selecting the Picture Display Mode
Switching the Picture
Display Using Different
Input Signals
1
Press .
• Each time
is pressed, the display
changes as shown on page 47 .
Note
• In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
• To return to the standard image, press
while “ RESIZE ” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY
DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image.
RESIZE
button
Screen display of the picture display mode
-46