Sharp PG-M20X - Manual (Page 63)

Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu
➝ For details, see page
36 .
1
When “ ” is displayed, press
or to set the Break
Timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
2
Press to cancel the Break
Timer.
Note
• Auto Power Off will be temporarily dis-
abled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
• The Break Timer will be displayed on the
startup image. To change the screen dis-
played during the Break Timer, change
the setting of “Startup Image” (see page
57 ).