Operation with the remote control unit (continued) – Sanyo CL2472 User Manual
Page 77
13
Operation with the Remote Control Unit (continued)
•
Choose the best position in the room for the remote control unit, which also
acts as the sensor for room comfort and transmits the operating instructions.
Once you’ve found this best position, always keep the remote control unit
there.
•
This appliance has a built-in 5-minute time delay circuit to ensure reliable
operation. When the operation button is pressed, the compressor will start
running within three minutes. In the event of power failure, the unit will stop.
2. Adjusting the Fan Speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to the
position.
This automatically sets the best fan speed for the room temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation, just set the FAN
SPEED selector button as desired. [
,
, or
]
3. Fan Only
If you want to circulate air without any temperature control, follow these steps:
STEP 1
Press the MODE selector button to switch to the fan mode
.
STEP 2
Press the ON/OFF operation button.
STEP 3
Press the FAN SPEED selector button to select the fan speed of
your choice (
,
or
).
NOTE
STEP 2
STEP 1
STEP 3
OI-800-13-EG
01_KS1872_En.fm Page 13 Monday, July 9, 2007 2:54 PM