Speco Technologies DVR-16/IP - Manual (Page 14)

13
MAIN MENU
1 Event List
2 OSD / Timer
3 Monitor
4 Camera
5 Record
6 Event
7 Others
8 Save / Load Default
9 Engineer
10 Engineer
11 Exit
Event List
1 02/10/20 08:12:39 L16
2 02/10/22 12:38:21 A3
3 02/10/22 15:58:53 M12
---Continue---
OSD / Timer
1 Date/ time
2 Date Display Mode Y/M/D
3 Date/ Time Display 2 Rows
4 Date/ Time Position
5 RS485 Time Calibration
6 Call monitor Dwell 5
7 Text Color
7
8 Display Type 1
9 OSD Display T&D/T
10 Exit
Date / Time
1 Year 2002
2 Month 12
3 Day 4
4 Hour 16
5 Minute 5
6 Second 20
7 Week MON
8 Exit / Update
9 Exit / Without Update
6. OSD Menu Setup
The OSD menu is composed in hierarchy architecture, it allows you to
configure the DVR-16/IP according to the applictation enveironment.
Many options can be selected via the operation of the OSD menu.
To enter this OSD menu, press the MENU button of the front panel,
then the OSD menu will appear with a highlight cursor over the first
item. The cursor can be moved by the up and down buttons.
If you want to exit the OSD menu, you may either 1)select the last
item “EXIT” and then press ENTER button; or 2)press ESC button of
the front panel directly.
6.1 Event List
The item allows you to enter the Event List. Up to 255 events will be
logged using non-volatile memory. The memory architectrue is “First
In First Out”, so always the latest events remain on the list.
6.2 OSD/ Timer
This menu allows you to set the current date/ time, and other
On-Screen-Display (OSD) parameters. You can press the ENTER
button to enter the sub-menu.
6.2.1 Date/ Time
Item 1~7 allow you to set the date and time, use the right/ left buttons
to adjust the DVR-16/IP to local time.
If you want to save the modification(s), move the cursor to 8 Exit/
Update and press Enter button, the adjusted setting(s) will be
memorized. If you don’t want to save the modifications, move the
cursor to 9 Exit / Without Update and press Enter button, the adjusted
setting(s) will be discarded.
6.2.2 Date Display Mode
This item allows you to select a format of date OSD display. You can use right/ left buttons to
choose the select from: Y/M/D, M/D/Y and D/M/Y.
6.2.3 Date/ Time Display
This item allows you to select one or two rows for Date /time OSD display.