Speco Technologies DVR-16/IP - Manual (Page 38)

37
11. Password
Each password contains 4 characters. If you want to enter DVR-16/IP menu or enter
playback mode, you have to enter correct password. You need to key the password in the
field then press “send” button before you enter DVR-16/IP menu or playback mode. The
password shown on screen will not change but you are already able to enter DVR-16/IP main
menu to change settings or to enter playback mode.
12. Channel Buttons
The number of channel buttons corresponds to the number of channels supported by the unit.
Press one of these buttons to view the channel full screen.
Note:
If you want to select DVR-16/IP menu item, you don’t have to do it by directional key. You can
use Channel Buttons instead. For example, if you want to select DVR-16/IP menu item 3
Monitor, you can just press Channel Button “3” on the right side.
13. DVR-16/IP ID
Users can set the DVR-16/IP ID here.
9. Connectors
Rear Board
Item Description Item Description
1 External I/O 6 RS-485 Port
2 Main Monitor output (S-Video) 7 Call Monitor Output (BNC)
3 Video Looping (1~16) 8 Main Monitor Output (BNC)
4 Power Jack 9 LAN Port
5 IDE Port 10 Video Input (1~16)
5 6 7 8 9 10
1 2 3 4