Speco Technologies DVR-16/IP - Manual (Page 9)

8
Sequence_1 Set Up
1
Pages 16 11 Page 8
2 Mode 0 12 Page 9
3 Timer 5 13 Page 10
4 Page 1 14 Page 11
5 Page 2 15 Page 12
6 Page 3 16 Page 13
7 Page 4 17 Page 14
8 Page 5 18 Page 15
9 Page 6 19 Page 16
10 Page 7 20 Exit
MENU
Press this button to enter OSD setup menu (the LED will be lit).
ENTER / ZOOM
1. In OSD menu mode, this button is used to make the selection or save settings.
2. In full-screened mode, this button functions as a “2x2 Zoom In” button (the LED will be lit).
DIRECTION
1. These buttons function as directional control in OSD menu.
2. In Zoom mode, press these buttons to view the wanted viewing area.
3. In multi-window mode, the DVR-16/IP allows you to select one window to playback the
recorded video while the DVR-16/IP is in Live mode. Press one of these buttons and a
window cursor will be displayed. Using Direction buttons to move the cursor to desired
window, and then press Play button to playback the recorded video. The password is
needed before you playback the reocrded video.
SEQ
1. In Live mode, press this button to enter automatic sequential
sequencing mode, and press it again to exit. The button LED will
be lit (and also those channel LEDs currently in display).
2. The DVR-16/IP allows you to setup the sequence. In Sequence
mode, press SET to enter and press MODE to exit this Sequence
Setup menu. The number on the top is to remind you which
sequence is being set. Other items will be described by following
paragraphs.
Pages
This first item allows you to decide the total number of pages for this sequence. The
maximun value is 16, which means that each sequence can have up to 16 pages.
Mode
This item allows you to decide which display mode will be used in this sequence.
“0“ represents “full screen” mode, …and “7” represents 16-windows mode.
Timer
This item allows you to set each page’s dwell time.
Page Setup
These items allow you to setup each page. Press Enter for page setup. Use directional
buttons to change each page’s channel setting.
ESC
1. In OSD mode, press this button to return to previous menu. At the end of playback, the
DVR-16/IP goes to Pause mode; press ESC to return to Record mode.
2. If you press this button and “Down Arrow” simultaneously, the DVR-16/IP will be shutdowned.