Speco Technologies DVR-16/IP - Manual (Page 8)

7
GOTO
1 Minute 30
2 Hour 20
3 Day 21
4 Month 11
5 Year 02
5 Goto Begin
6 Goto End
7 Exit
4. Front Panel Introduction
The DVR-16/IP front panel controls enable you to perform preset and programmable functions.
The figures below show the available buttons on the front panels.
**DVR-16/IP starts detecting the camera and recording automatically after power is on.
4.1 The Buttons on the Front Panel
The following are the introductions of DVR-16/IP front panel buttons. The front panel is
illustrated and each button is described by name and function.
CHANNEL 1~16
1. The number of channel buttons corresponds to the number of channels supported by the
unit. Press one of these buttons to view the channel full screen.
2. Press the number button corresponding to the wanted camera, and then press the SET
button to go to the “External Devices” Menu; you should go to the “Configuration Table 1”
first to set the correspondent dome’s “PTZ” item to enable.
GOTO
In playback mode, you can press GOTO to enter GOTO menu. This
menu allows you to search for certain recorded video by date and
time, or you may either go to the beginning or the end of the recorded
video.