Sunwave Tech. SRC-3000b - Manual (Page 19)

3.4 Using Learning Function to Customize SRC-3000b
15
3.4 Using Learning Function to Customize SRC-
3000b
You can use Learning Function to get the codes directly
from the original remotes.
3.4.1 Before Using Learning Function
Before you start to use Learning Function to get the codes,
please pay attention to the followings:
1. Before using Learning Function, please delete the
original codes saved in the specific device. For
example, to operate the living room TV instead of the
bedroom TV, please delete all the codes (for the living
room) saved in TV device at first. And then learn the
codes for the TV in the bedroom.
2. Learning Function does not work with all devices.
3. All keys except the Code Setup key, Delete key, Macro
key, and System setup key can be learned.
3.4.2 Learning from Another Remote Control
Please put the original remote and SRC-3000b on a flat
surface. And then have the original remote pointed to the
learning eye of SRC-3000b. The distance between two
remotes ought to be 2-4 inches (5-10 cm).