Sunwave Tech. SRC-3000b - Manual (Page 22)

SRC-3000B User’s Manual
18
NOTES:
a. Although SRC-3000b will guide you to learn each key,
you can also select any key to learn as you want by
touching it directly. You can also change the page by
touching the device key.
b. If a key has been programmed with a code, the icon
appears on the LCD. You can overwrite the code
by learning directly.
c. The SRC-3000b screen displays the icon if SRC-
3000b learns the code successfully.
d. You can press at any time to exit the mode when
finishing learning all the codes.
e. The device key can also save a code. To have the
device key to learn a code, press the key for 3 seconds
until it is blinking. Please follow step 7 to get the code
for the key. When SRC-3000b learns the code
successfully, the icon will also show up.