Sunwave Tech. SRC-3000b - Manual (Page 30)

SRC-3000B User’s Manual
26
3.6.3 Macro Interruption
After pressing the preset Macro key for a device, you
can interrupt the command sequence by pressing ,
then appears and the macro stops.
3.6.4 Viewing the Macro Key
You can view which keys are used as Macros for any
particular device. Follow these instructions:
1.
Press the device key (for
example TV).
2. Press and then the
Macro keys will be
displayed on the LCD.
For example, if you set
number 9 as a Macro key
for on PAGE 1 in the TV
device, the preset Macro
key ”9” will appear when
you press the key.
3. If you want to check the
Macro key on Page 2, press
the device key to switch to
the second device page,
and then repeat Step 2.