Sunwave Tech. SRC-3000b - Manual (Page 42)

SRC-3000B User’s Manual
38
Problem Solution
IR LEARNING is not
successful. 1. Replace batteries in the SRC-3000b
and the remote you are trying to
configure.
2. Keep the distance between the
remote control and the SRC-
3000b’s learning eye to about 2~4
inches.
3. Do not use the learn function near
an incandescent lamp.
4. Memory capacity is full (56 keys for
each of eight models).
5. The learning process has no errors,
but you still can’t control your AV
devices: repeat the learning
procedure again. If you still can’t
solve the problem, contact
Sunwave for help.
6. Original remote might not be
compatible with learning
procedure.
A key of your
existing remote
performs two or
more functions
Some remotes issue multiple
commands when a key is held down.
Please be sure to teach different keys
of SRC-3000b for these different
commands. Each key of SRC-3000b
can only learn one command.
The LCD screen turns
off.
The SRC-3000b is preset automatically
to switch the LCD off after the Power
Down time (90 seconds). Just tap the
touch screen to turn the SRC-3000b
back on again.