Sunwave Tech. SRC-3000b - Manual (Page 28)

SRC-3000B User’s Manual
24
3.6.2 An example to create a Macro
The following example will help you better understand
creating a Macro sequence. It is provided to teach you
how to create a Macro. By no means it is the only Macro
sequence you can create. You can create Macros using
any sequence of commands you desire.
The following Macro example will:
1. Turn the TV on.
2. Switch the TV to Video mode.
3. Turn the DVD player on.
4. Create a five-second delay.
5. Play a DVD.
Set up the example macro using the following steps:
1. Press and hold for 3 seconds to enter the
confirmation screen.
2. Press each number key (2, 4, 6, 8) in any order until they
disappear and begins flashing.
3. Select TV device key . Then, press “1” in the TV
device will be used to start the macro in the normal
operation mode.
NOTES:
a. 1 will no longer perform its original function.
b. If you select a key that already has a macro stored
in it, the new macro replaces the old one.
c. Do not use one of the eight DEVICE KEYS to run
your Macro.
4. Press to switch to Video mode so that you can
watch the DVD.