Sherwood RX-773 - Manual (Page 19)

19
ENGLISH
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the tuner is automatically
selected and the band is changed as follows ;
FM STereo FM MONO AM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce the
noise, then FM broadcasts are reproduced in monaural
sound.
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING UP( ,
+)/ DOWN( , -) buttons repeatedly until the right frequency
has been reached.
Manual tuning
or
or
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
1.
Select the tuner and then the desired band.
2.
Press the TUNING UP( , +)/ DOWN( , -) buttons for
more than 0.5 second.
or
Auto presetting
• Auto presetting function automatically searches for FM
stations only and store them in the memory.
• While listening to radio broadcasts, press and hold down the
(ENTER/)MEMORY button for more than 2 seconds.
• Then "AUTO MEM" flickers and this receiver starts auto
presetting.
• Up to 30 FM stations can be stored.
Notes:
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, preform "Manual
presetting" procedure with using "Manual tuning" operation.
or