Sherwood RX-773 - Manual (Page 27)

ENGLISH
27
Specifications
AMPLIFIER SECTION
• Power output, 8
Ω
, THD 0.7 %, 20 Hz~20 kHz, only a pair of speakers driven | 2 X 100 W
• Total harmonic distortion, 8 Ω , @ -3dB, 20 Hz~20 kHz | 0.05 %
• Intermodulation distortion
60 Hz : 7 kHz= 4 : 1 SMPTE, 8 Ω , 100 W | 0.03 %
• Input sensitivity, 47 k
Ω
Phono(MM) | 2.5 mV
Line(CD,DVD,TAPE,AUX) | 220 mV
• Signal to noise ratio, IHF "A" weighted
Phono(MM) | 75 dB
Line(CD,DVD,TAPE,AUX) | 98 dB
• Frequency response
Phono(MM), RIAA, 20 Hz~20 kHz | ±0.3 dB
Line(CD,DVD,TAPE,AUX), 10 Hz~100 kHz | ±3 dB
• Output level
TAPE OUT, 2.2 k Ω | 200 mV
• Bass/Treble control, 100 Hz/10 kHz | ±10 dB
FM TUNER SECTION
• Tuning frequency range | 87.5~108 MHz
• Usable sensitivity, THD 3%, S/N 26 dB | 15 dBf
• 46 dB quieting sensitivity, mono/stereo | 25.2/45.2 dBf
• Signal to noise ratio, 65 dBf, mono/stereo | 68/65 dB
• Total harmonic distortion, 65 dBf, 1 kHz, mono/stereo | 0.5/0.8%
• Frequency response, 20 Hz~14 kHz | ±3 dB
• Stereo separation, 1 kHz | 30 dB
• Capture ratio | 4 dB
• IF rejection ratio | 75 dB
AM TUNER SECTION
• Tuning frequency range | 522~1611 kHz
• Usable sensitivity , S/N 20 dB | 55 dBµ/m
• Signal to noise ratio | 50 dB
• Selectivity | 30 dB
GENERAL
• Power supply | 230 V~ 50 Hz
• Power consumption | 330 W
• Switched AC outlet | TOTAL 100 W (0.43 A)
• Dimensions (W H D, including protruding parts) | 440X141X370mm(17-3/8X5-1/2X14-1/2 inches)
• Weight (Net) | 8.6 kg(19 lbs)
Note: Design and specifications are subject to change without notice for improvements.