Sherwood RX-773 - Manual (Page 21)

21
ENGLISH
or
or
LISTENING TO RDS BROADCASTS (FM ONLY)
RDS Tuner(Regional Option for some countries in Europe, etc.)
• Use this function to automatically search and receive the stations offering RDS services.
RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is
capable of translating these signals and putting the information on the display. These codes contain the following informations.
Program Service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).
Note : In the other countries, RDS tuner function cannot be available.
RDS search
• Use this function to automatically search and receive the stations broadcasting the traffic program.
• "TP SRCH" is displayed.
TP search
• The tuner automatically searches stations offering RDS
services and the station name is displayed.
• If no other RDS station is found, "NO RDS" is displayed.
• When "RDS SRCH" is not displayed, repeat again from
the above step 1.
• The tuner automatically searches stations broadcasting
the traffic program.
• "NO TRAFF"is displayed if the signal is too weak or there
are no stations broadcasting the traffic program.
• When "TP SRCH" is not displayed, repeat again from the
above step 1.
• Each time this button is pressed, the search mode
changes as follows :
RDS SRCH TP SRCH PTY SRCH OFF
1.
In the FM mode, select the RDS search mode.
1.
In the FM mode, select the TP search mode.
2.
While displaying "TP SRCH".
2.
While displaying "RDS SRCH".