Symbol Technologies 1813-A2-GB20-00 - Manual (Page 27)

1813 VoIP Gateway User’s Guide
5.3 PhoneList
The PhoneList tab lists and configures the local phone parameters. This section configures the
SIP parameter required to build SIP messages for the phone attached to the Gateway to send
signaling information to the other party. When a call is received, the Gateway checks whether
the called number matches any of the entries in the phone port list. If no entry is matched, the
call request is dropped. The 1813 VoIP Gateway supports an FXS port for phone service and
there is a single entry, Port No. 1, in the phone list.
Port No This displays the port number. Port No. 1 is mandatory
and is not selectable.
User Name Name of the local SIP host. When a call is received, the
host checks whether the called number matches the entry
in the phone port list. If it is not matched, the call request
will be dropped.
Display Name The name displayed on phone sets that support the Caller
ID function, when you call them. It is for identification
purposes only, and can be used to hide or show the actual
user name.
Expire: The time period the user’s registration is valid with the
Registrar/Proxy Server. The default value is 120 seconds.
Qvalue Enter a value between 0 and 1 for registering with the
proxy (in case the same username is registered from a
different location). Decimals are accepted, such as 0.3.
In general, a larger number has higher priority for the
proxy to connect the call. If the same Qvalue is used, the
call connection is up to the call policy of the proxy.
Codec: The preferred codec of this user. The default is PCMU
first.
27