Symbol Technologies 1813-A2-GB20-00 - Manual (Page 29)

1813 VoIP Gateway User’s Guide
5.4 Remote
The Remote tab configures the buddy list. The Gateway looks up the buddy list for the dialed
phone number first. If the phone number is not listed, then the Gateway queries the SIP proxy. It
is also suitable for peer-to-peer calling in cases without a SIP Registrar/proxy. For the case
without a SIP Registrar/proxy, the host phone port can’t call the user agent that is not in the
buddy list.
User Name Name of the remote SIP host, which should be the name of peer
SIP host.
Speed Dial The phone number maps to the remote party SIP-URI after
dialing on key/phone pad. This should be unique for different
SIP-URI.
HOST The host IP address to call.
Port No Port number of the remote user agent where it will receive SIP
messages. The default port number is 5060, which is a well-
known port for SIP protocol.
Display Name The name displayed on phone sets that support the Caller ID
function. It is for identification purposes only, and can be used to
hide the actual user name.
29