Symbol Technologies 1813-A2-GB20-00 - Manual (Page 34)

1813 VoIP Gateway User’s Guide
6.1.3 Ping
To access the Ping screen, click on the Ping button, which is located under the Advanced menu
bar. This screen performs the ping test.
A ping test is used to verify the status of a network connection after the RIP or static route
function is enabled. Ping sends a request message to the host and waits for a return message.
This function can verify if the remote host is reachable. Ping can also measure the round-trip
time to the remote host. To access the Ping test screen, click on the Ping tab. Enter the Host
Name or IP address of the remote terminal and click on Submit to start the ping and display the
results.
34