Sharp XE-A201 - Manual (Page 58)

56
TRAINING MODE
The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to “Training clerk specification for training mode” in “ADVANCED FUNCTION PROGRAMMING” in
page 48.
The training operation is valid only in REG, MGR and
mode.
The corresponding clerk memory is only updated in the training mode.
A clerk set in training 15 L
1000
>
3 @
#
A
Print Key operation example
A201_4 FOR THE MANAGER 01.11.11 10:23 AM Page 56