Sharp Conference Series XG-V10WU - Manual (Page 19)

E-18
Setup & Connections
Watching DVD and Digital TV Images
1 Connect each BNC connector of a component cable to the corresponding
BNC INPUT 2 terminals on the projector.
• BNC-RCA adaptors are needed for use with RCA type cables and sources.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
3 To use the built-in audio system, connect one end of an audio cable (sold
separately) to the AUDIO INPUT 2 terminal on the projector.
4 Connect the other end to the audio output terminal on the DVD player or DTV
decorder.
When connecting this projector to a DVD player or DTV decoder, select
“Component” for “Signal Type” on the GUI menu. (See page 45.)
Connecting to a DVD player, DTV decoder and other component video
equipment using the 5 BNC Input
DTV decoder
or
DVD player
Amplifier
To audio input terminals
Audio cable (sold separately)
For Better Sound
Connecting to an amplifier and other audio components
CAUTION
• Always turn off the projector before connecting to audio components, in order
to protect both the projector and the components being connected.
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminals allow you to output audio to audio components from the
selected AUDIO INPUT 1 to 5 terminals connected to audiovisual equipment.
Three BNC-RCA adaptors
(Sold separately)
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
3
2 To analog component
output terminals
1
4 To audio output terminals
Component cable (sold separately)
e.g. Outputs for Inputs 4, 5
Audio cable
(sold separately)