Special mode adjustment, Checking the input signal, Adjusting the computer images (rgb menu only) – Sharp Conference Series XG-V10WU User Manual

Page 49

Advertising
background image

E-48

Basic Operation

Adjusting the Computer Images (RGB menu only)

Special Mode Adjustment

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Special Modes”, and then

press ©.

4 Press ∂/ƒ to select the optimal resolution mode.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

• Avoid displaying computer patterns which repeat every

other line (horizontal stripes). (Flickering may occur, making
the image hard to see.)

• When inputting DTV 480P signals, select “480P” in step 4

above.

Projector

(GUI) On-screen Display

Remote Control

MOUSE

ADJ.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Signal Info” to display the

current input signal.

4 To exit from the GUI, press MENU.

This function allows you to check the current input signal
information.

Projector

MOUSE

ADJ.

Remote Control

1.2.3

4.5.6

1, 6

5

2, 3, 4

1.2.3

4.5.6

1, 4

2, 3

(GUI) On-screen Display

Checking the Input Signal

Advertising