Sharp Conference Series XG-V10WU - Manual (Page 30)

E-29
Setup & Connections
LENS Button
Projector
1.2.3 4.5.6
1, 4a
4b
3
2
4b
Remote Control
1 Press LENS to select mode. Each time LENS is
pressed, the screen changes as shown on the
left.
2 Press ENTER to display test
pattern.
3 Press
∂ /ƒ/ß/© to make
adjustments.
4 a. Press LENS until normal screen appears.
b. To reset the “KEYSTONE” and “DIGITAL SHIFT”
setting, press UNDO.
Digital Image Adjustments
This function can be used to adjust the focus, zoom,
lens shift,
keystone and digital shift settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
MOUSE ADJ.
• On 4:3 NORMAL image, the same setting as 16:9 WIDE
image can be used.
• At first when buttons are pushed, “ZOOM” and “LENS
SHIFT” functions move slowly. Keep pushing to move them
faster.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the KEYSTONE setting.
• Do not touch the lens when adjusting the focus or zoom.
• Digital shift function only works with WIDE picture display
modes during video or DTV input. (See page 34 for details.)
The DIGITAL SHIFT screen is not displayed when projecting
images other than WIDE.
Digital Shift
or
Press ∂. Press ƒ.
On-screen Display
(Example: 5:4
NORMAL image)
On-screen Display
(Example: 16:9
WIDE image)