Sharp Conference Series XG-V10WU - Manual (Page 32)

E-31
Operation Buttons
1.2.3 4.5.6
Conference Series
Selecting the Input Signal Source
Using the Operation Buttons
Muting the Sound
Press VOLUME
؀/؁ to adjust the volume.
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
1.2.3 4.5.6
Projector Remote Control
Projector Remote Control
VOLUME
buttons
MUTE
button
1.2.3 4.5.6
Projector Remote Control
INPUT
buttons
Adjusting the Volume
Press INPUT 1.2.3 or INPUT 4.5.6 again to change the
mode.
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
INPUT 1 Mode INPUT 2 Mode INPUT 3 Mode
INPUT 4 Mode INPUT 5 Mode INPUT 6 Mode
On-screen Display
On-screen Display
On-screen Display