Sharp Conference Series XG-V10WU - Manual (Page 63)

E-62
Useful Features & Network Function
Setting Up the Optional Boards
Network Function
Three optional Expansion Boards from Sharp are also available for specialized application. Please see your local
Sharp Industrial LCD Products Dealer for details on these boards. Be sure to have service personnel install optional
boards.
Boards for Network Capability
LAN Board RS-422 Board
Expansion Video Board
SDI (Serial Digital Interface)
RS-422 CONTROL
INPUT
DISABLE
ENABLE
DISABLE
ENABLE
OUTPUT
Soon-to-be-released
The Optional Board function allows you to set and
confirm the optional boards.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options (2)”.
3 Press ∂/ƒ to select “Optional Board”.
4 To exit from the GUI, press MENU.
The type of board and the board status are displayed
as shown below.
• LAN Board (10BASE-T)
Set the IP Address, Gateway and Subnet mask in
accordance with the sub menu.
• SDI Board
The status of the SDI Board is displayed.
• RS-422 Board
The input and output control signals are displayed.
• For details on intended purpose, see the optional boards
operation manuals.
MOUSE ADJ.
1.2.3 4.5.6
1, 4
2, 3
Projector Remote Control
(GUI) On-screen Display
INPUT 6 SDI
INPUT OUTPUT AUDIO
INPUT
e.g. when installing SDI board