Samsung SP-H800 - Manual (Page 23)

CONNECTING TO VIDEO EQUIPMENT
Connecting to VCR/Camcorder/Cable Box
Connections and Source Setup
Connecting to Video Equipment
23
Connect COMPOSITE (yellow)
input port of the projector to the
VIDEO (yellow) OUT port of video
equipment using the video cable.
If the video equipment has S-VIDEO OUT
port, connect it to S-VIDEO input port of the
projector.
■ Using the S-VIDEO connection, provides
a higher visual quality.
Turn on the projector and press the
COMPOSITE button to select Composite.
Connect the projector and the video
equipment via S-Video cable and press the
S-VIDEO button to select S-Video.
■ When Composite Mode is not available, check the
video cables are in place.
1
Viewing the picture
NOTE
■ Check that the projector and the video
equipment are turned off before connecting
cables.
■ This projector does not support sound.
(Separate audio system is needed for sound.)
■ This product does not support the PAL-N
broadcasting type.
Rear side of Projector
VCR
S-Video Cable Video Cable
Cable Box
Camcorder
Composite COMPOSITE
1
S-VIDEO
2
or
Rear Connection
2
1
When finishing connecting the
devices, connect the power of the
projector and the VCR.
2