Samsung SP-H800 - Manual (Page 5)

Caution on Lamp Use and Replacement
Preparation
Caution on Lamp Use and Replacement
5
■ The projector lamp is an expendable whose life time and
performance is determined by the operating conditions such as the
usage time and environment. The lamp needs to be replaced
periodically before the life time ends so as to prevent a sudden
degradation of performance or malfunction.
■ Free servicing will be offered within 90 days after purchasing of the
product and within 300 hours of product use, if the problem is due
to a defective lamp.
■ You can check the lamp use time by pressing the INFO button on
the remote control.
Projector Lamp
■ Unplug the power cord before replacing the lamp.
■ Inside of the projector is very hot. Cool off the projector for at least
an hour after turning off.
■ Contact your dealer to purchase a lamp for replacement.
(Ultra violets from the lamp can damage your eyes.)
■ Turn off the power of the lamp before replacement or repair.
(Due to the high-pressure of the lamp, it is possible to explode.)
■ Take care when handling the lamp because any broken pieces of
glass may harm you if the lamp breaks. For more detailed
information about the procedures to use, refer to <Replacing the
Lamp> on page 83.
Caution on Lamp Replacement
■ This projector produces intense light. Do not stare light source
directly.
Take Care: The ultraviolet ray from the lamp may harm your
eyesight.
■ Do not touch the exhaust vent during operation. It can be very hot.
■ Do not expose the unit to rain or moisture.
Caution on Lamp Use