Samsung SP-H800 - Manual (Page 49)

Setup
Light Setting
49
1
MENU
2, 3, 4
2, 3, 4
…/†
5
EXIT
Light Setting
Used to set the image brightness by adjusting the amount of light generated by the lamp.
Theater Using this function, you can adjust the light level of the
lamp so that you can comfortably watch pictures on the
screen even when watching under dark conditions.
It also lowers power consumption and extends the life
of the lamp.
Bright Used to enhance the brightness in relatively bright
ambient light. Since this mode increases the light level
of the lamp, you may experience more noise which is
produced when the projector is cooled down.
Light Setting Mode
Press the MENU button.
The main menu is displayed.
1
Press the
▲ or ▼ button to move to Setup, then
press the button.
The Setup menu is displayed.
2
Press the EXIT button to exit the settings.
5
Press the
▲ or ▼ button to move to Light
Setting, then press the button.
The Light Setting options will be displayed.
3
Press the
▲ or ▼ button to move to desired
mode, then press the button.
Setup is switched to the selected mode.
4
Setup
Install : Front-Floor √
Light Setting : Theater √
V-Keystone √
Test Pattern √
PC √
Factory Default √
† More
Move Enter Return
Light Setting
Theater √
Bright √
Move Enter Return