Samsung SP-H800 - Manual (Page 24)

24
Connections and Source Setup
Connecting to Video Equipment
S-VIDEO OUT
COMPONENT VIDEO OUT AUDIO OUT
Rear side of Projector
DVD
Component Cable
CONNECTING TO VIDEO EQUIPMENT
Connecting to DVD
Rear Connection
Connect the COMPONENT 1
(Y/Pb/Pr) or COMPONENT 2
(Y/Pb/Pr) input port at the back of the
projector to the Component port at the
back of the DVD with the component
cable.
Turn on the projector and press the COMP.1
button to select Component1.
Press the COMP.2 button to select
Component2 if COMPONENT2 is connected.
■ When Component Mode is not available, check that
the component cables are in place.
Viewing the picture
NOTE
Component Ports are marked as (Y, PB,PR),
(Y, B-Y, R-Y) or (Y, Cb, Cr) depending on
the manufacturer.
Component1
1
COMP.1
1
COMP.2
2
2
1
When finishing connecting the
devices, connect the power of the
projector and the DVD.
2