Preparing for operation – Stinger MC POWER SYSTEM MC2 User Manual
Page 18
Chapter 2: 26 Amp-Hour Series
MC
2
Power Systems User's Guide
Preparing For Operation
Parts Listing (Fig 7)
• (1) Electronic Enclosure (A)
• (1) Battery Enclosure (B)
• (1) Cord Set (Fig 10 and 11)
1
Unpack the unit carefully and inspect it for damage. There will be two parts -
Electronic Enclosure and Battery Enclosure. WARNING: Battery enclosure is
HEAVY!
1110227 Revision 2
6
November
2006
Electronic Enclosure (A)
Battery Enclosure (B)
Fig 7: MC
2
Power System Parts
2
Connect electronic enclosure (A) and battery enclosure (B) at docking connector (Fig
8).
Docking Connector 2
Docking Connector 1
Battery Enclosure (B)
Electronic Enclosure (A)
Fig 8: Docking Connection
3
Install security screws (C) with security wrench (included).