Stinger MC POWER SYSTEM MC2 - Manual (Page 37)

MC 2 Power Systems User's Guide Chapter 6: Power System Management Software
Configuring COM Ports
The Advanced Power Monitor software does not automatically determine which COM
port has been set for the communication between the computer and power system. The
user will have to manually determine what COM port has been assigned and manually
set it in the Advanced Power Monitor software by performing the following steps:
1 From the Start menu, point to Settings, and then click Control Panel.
2 Double-click System.
3 Click the Hardware tab.
4 Click Device Manager, depicted as follows:
5 Click the plus sign (+) by Ports (COM & LPT).
1110227 Revision 2
November 2006 25