Stinger MC POWER SYSTEM MC2 - Manual (Page 21)

MC 2 Power Systems User's Guide Chapter 2: 26 Amp-Hour Series
User-Selectable Switch Settings
Voltage Settings Orientation
• The diagram below shows each switch location and which output it controls.
• The output voltage can be set by user between 12–20V on outputs ‘CPU/Laptop’ and
‘ACC 2 (optional)’ and between 3.3 – 12V on outputs ‘ACC 1/Monitor’ and ‘ACC 3
(optional)’.
• All outputs have a maximum continuous current of 4 amps.
• User-selectable switches are located on the top and side of the electronic enclosure
(Fig 12).
• Power outlets are intended for workstation mounted equipment ONLY.
CPU/Laptop & ACC 2 Power Settings ACC 1/Monitor & ACC 3 Power Settings
1110227 Revision 2
November 2006 9
Fig 12: Location of User-selectable Switches Voltage
Settings for
ACC 2 & ACC
3 Power
Outputs
(optional)
Voltage Settings for
CPU/Laptop & ACC
1/Monitor Power
Outputs