Stinger MC POWER SYSTEM MC2 - Manual (Page 8)

MC 2 Power Systems User's Guide Product Safety Information
1110227 Revision 2
November 2006 viii
Product Safety Information
Safety Guidelines
The MC² Power System Series™ is designed to ensure both the highest level of product
quality and safety for the user. To maintain both quality and safety, follow the guidelines
and instructions in this manual.
• Use the power system only as intended.
• Do not place the power system near a window. Exposing the power system to rain,
water, moisture, or constant, direct sunlight can severely damage it.
• To maintain your warranty, refer all servicing to Stinger Medical qualified personnel.
The MC² Power System has no user-serviceable, internal parts.
• Do not cover or obstruct any venting holes on the power system.
• Store the power system within 10 to 30 degrees Celsius (50 to 86 degrees
Fahrenheit). Storing the system outside the temperature range could result in
permanent damage.
• Use and maintain the cord set provided with the unit.
• If any cord or cable is frayed or damaged, replace it immediately with another of the
same type and rating as supplied by Stinger Medical.
• To clean the exterior of the power system, follow the UL 60601-1 standard for use in
a hospital environment. See “ Cleaning Procedures ” for more information.
• Before cleaning the 26 Amp-Hour unit, disconnect the electronic and power
enclosures from their power sources.
• Before cleaning the 35 Amp-Hour unit, disconnect the electronic enclosure from its
power source.