Sony BRC-Z330 - Manual (Page 16)

Ov
er
v
ie
w
Location and Function of Parts
16
Installing batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
When you dispose of the battery, you must obey the law
in the relative area or country.
Note
To avoid risk of explosion, use R6 (size AA) manganese
or alkaline batteries.
RM-BR300 Remote Control Unit
(not supplied)
This manual explains the operations of the RM-BR300
Remote Control Unit when it is used with BRC-Z330
cameras.
For operations with other cameras, refer to the
Operating Instructions supplied with the RM-BR300.
Front
A LOCK button and indicator
Press the LOCK button for more than one second,
and the LOCK indicator lights and the values set by
the VALUE/R, BRIGHT/B and FOCUS controls
are locked. (The indicators of the locked controls
are turned off.) The AUTO/MANUAL button is
also disabled.
Press the LOCK button for more than one second
again to unlock the controls and buttons.
B VALUE/R control
When the brightness adjustment mode is
selected with the MODE button (with the
VALUE indicator lit):
Adjusts the value of the item (SHUTTER, IRIS or
GAIN) selected with the menu of the camera.
When the VALUE indicator is lit, the function of
the control varies according to the MODE setting in
the EXPOSURE menu of the camera. For details,
see “Functions of the VALUE and BRIGHT
controls” on page 41.
When the white balance adjustment mode is
selected with the MODE button (with the R
indicator lit):
The function of the control with the R indicator lit
varies according to the white balance mode selected
on the camera. For details, see “Functions of the R
and B controls” on page 40.
C BRIGHT/B control
When the brightness adjustment mode is
selected with the MODE button (with the
BRIGHT indicator lit):
Adjusts the value of the brightness of the camera,
etc.
When the BRIGHT indicator is lit, the function of
the control varies according to the MODE setting in
the EXPOSURE menu of the camera. For details,
see “Functions of the VALUE and BRIGHT
controls” on page 41.
When the white balance adjustment mode is
selected with the MODE button (with the B
indicator lit):
The function of the control with the B indicator lit
varies according to the white balance mode selected
on the camera. For details, see “Functions of the R
and B controls” on page 40.
D MODE button
Press this button to select the function of the
VALUE/R control and BRIGHT/B control.
When the brightness adjustment mode is selected,
the VALUE and BRIGHT indicators are lit.
When the white balance adjustment mode is
selected, the R and B indicators are lit.
E FOCUS control
Turn this control counterclockwise (toward NEAR)
to focus on a near subject, and clockwise (toward
FAR) to focus on a far subject.
Two R6 (size AA)
batteries (not supplied)
1
1
9
LOCK
MODE
VALUE
RESET
MENU
PRESET
SHIFT
L/R DIRECTION
PANEL LIGHT BLACK LIGHT PAN-TILT RESET ONE PUSH AWB
POWER AUTO MANUAL
AUTO
ONE PUSH AF
2 3 4 5 6 7
2
10
STD REV
3
11
4
POSITION
CAMERA
12
5
13
6
14
7
15
8
16
R
– +
BRIGHT
B
– +
FOCUS
NEAR FAR
1
8
qh qj qk ql w;
90qaqsqd qf qg
2
3
4
5
6
7