Sony BRC-Z330 - Manual (Page 45)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Installation
45
Installation on a ceiling (example)
1
Set IMG-FLIP to ON in the SYSTEM menu.
2
Remove the four screws on the bottom of the
camera to remove the four feet.
3
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the a hole for screwing on the ceiling
bracket (A) to the front of the camera as illustrated,
align the screw holes on the ceiling bracket with
those on the bottom of the camera, then attach the
bracket to the camera.
Note
For attaching the camera to the ceiling bracket, use
only the supplied screws. Using other screws may
damage the camera.
4
Attach the wire rope to the junction box on the
ceiling.
Use an M4 or larger outside diameter screw (not
supplied) to attach the wire rope to the junction box.
5
Attach the ceiling bracket (B) to the junction box on
the ceiling.
Align the holes in the bracket with those in the
junction box, and use appropriate screws (not
supplied).
There are three screw holes along the edges of the
ceiling bracket (B). Later, the front of the camera
will be positioned at one of the screw holes. Adjust
the direction of the ceiling bracket (B) so that the
camera will face the front and attach the bracket
securely.
3M3 × 8 (supplied)
Ceiling bracket (A)
Front of
camera
Ceiling
Wire rope
(supplied)
Hole for connecting cables
M4 or larger
diameter screw
Ceiling
Front of Camera
Ceiling bracket (B)
f hole