Sony BRC-Z330 - Manual (Page 52)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Connections
52
To connect the Remote Control Unit
using the VISCA RS-422 connectors
You can use the VISCA RS-422 connectors to connect
the RM-BR300 Remote Control Unit to the camera
instead of the VISCA RS-232C connectors. Use of the
VISCA RS-422 connectors allows the connection up to
1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plugs that come with the camera and the
Remote Control Unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (pages 70 and 71) and the
wiring diagram of VISCA RS-422 connection
(page 72).
For the use of the RS-422 connector plugs, see page 73.
Notes
• When using the VISCA RS-422 connectors, check
that the BOTTOM switch on the bottom of the camera
(page 14) and the DIP switch on the bottom of the
Remote Control Unit (page 18) are set to RS-422.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
Connecting a Monitor, etc.
Equipped with the Analog
Component (YPbPr) Input
Connector
RGB/COMPONENT
VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN
VIDEO
IR SELECT
75
1
2
3
OFF ON
DATA MIX
OFF ON
IN VISCA RS-232C OUT S VIDEO
!
DC IN 12V
R
DC IN 12V
VISCA RS-422 cable
VISCA RS-422
VISCA RS-422
RM-BR300 Remote
Control Unit
DC IN 12V
RGB/COMPONENT
VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN
VIDEO
IR SELECT
75
1
2
3
OFF ON
DATA MIX
OFF ON
IN VISCA RS-232C OUT S VIDEO
!
DC IN 12V
R
DC IN 12V
RGB/COMPONENT
Connecting cable with
D-sub 15-pin connectors
(commercially available)
to component video input
HD video monitor, etc.