SpectraLink Link 150 M3 MCU - Manual (Page 41)

SpectraLink Corporation Installation and Operation
Link WTS – Link 150 M3 MCU
9.6 Replace a Base Station
To replace a Base Station, unplug the existing Base Station and plug in the new Base
Station.
• The LED will blink red and green as the system software downloads to the Base
Station and the Base Station is tested.
• When the LED blinks amber, the system is ready for operation.
• When the LED blinks green, a handset has established a radio link with that Base
Station.
• If the LED turns solid red, there should be an error message on the MCU’s
STATUS LEDs and the MCU ERROR LED should be lit.
PN: 72-0075-01-F.doc Page 41