SMC Networks Sunny Mini Central SMC 5000A - Manual (Page 11)

SMA Technologie AG Safety Instructions
Installation Guide SMC50A_60A-IEN073320 Page 11
3.2 Installer's Responsibilities
This installation guide, the operating manual and the documentation of installed
components must be kept in the immediate vicinity of the inverter and must be available
to installation, operation, maintenance and service staff at all times.
The inverter should only be used when it is safe to do so. All safety features must be
accessible at all times and their correct operation should be regularly tested.
Read this installation guide carefully and be sure to observe and understand all safety
regulations when installing and commissioning the system. You must also observe and
understand all connection requirements of the local energy supplier and all applicable
national codes and standards for installation of this equipment.
The information regarding operational safety refers to the regulations of the European
Union valid at the time the inverter was produced. The installer is obliged to make sure
that the mentioned safety measures comply with the regulations valid at the time and to
observe new regulations when installing the inverter. Outside the European Union, the
laws on occupational safety applicable in the deployment location of the device and
the respective national requirements must be adhered to.
In addition to the work safety measures in this installation guide, the general safety and
accident prevention regulations which apply where the inverter is installed and the valid
environmental protection regulations must be observed and followed.
Follow all instructions in this installation guide completely and without restrictions!
Each person working on an electrical device is responsible for the safety
of all persons involved and for the safety of the device.
Be sure to observe all standards and regulations applicable to the
installation and site.