Standard Horizon CP1000C - Manual (Page 31)

GPS chartplotters Page 33
Figure 3.5 - Screen display pages
3.6 CUSTOMIZING THE SOFT KEYS
The “Soft Keys” (CP175C and CP1000C) can be individually customized from the default
pages (discussed above) to the following: CHART, NAVIGATION, HIGHWAY, CELE-
STIAL, DSC LOG, DSC DIRECTORY, NMEA DISPLAY, NMEA DATA, DEPTH TREND,
TEMP TREND, WIND SPEED TREND, TEMP TREND, MARK/WAYPOINTS LIST and
USER C-CARD.
When the optional FF520 Dual frequency Fish Finder is connected the any of the key can be
customized to show 50 or 200kHz full page, 50 or 200kHz Chart/Fish split screen and zoom
screens.
Figure 3.6 - Window options of the selected Soft Key
1. To change, momentarily press any of the “Soft Keys”, then press and hold the key you
want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENTER] or move the ShuttlePoint knob to the right to save the page to the
selected “Soft Key”.
3.7 OTHER SETTINGS IN GENERAL SETUP MENU
You will notice the GENERAL SETUP menu has other selections that allow you to
customize: