Standard Horizon CP1000C - Manual (Page 39)

GPS chartplotters Page 41
6. The chartplotter is in Cursor mode, to switch to home mode press [CLEAR] to so the
vessel stay in the center of the page.
7. On the CP175C and CP1000C two Soft Keys are also shown that allow you to quickly
switch to the HIGHWAY page or to stop navigation.
8. To STOP Navigation, press the GOTO key an the following WARNING page is shown.
Select Stop and press [ENTER].
5.5 GOTO MARK
1. Move the ShuttlePoint to an open position (no buoy, warning etc. under the cursor) on
the Chart Page.
2. Press [GOTO] to show the GOTO popup window.
3. Move the ShuttlePoint knob to select MARK and press [ENTER] to show the USER
POINTS.
4. Move the ShuttlePoint to the highlight the desired Mark or Waypoint and press [GOTO].
5. You will notice a circle is drawn around the Icon Symbol. This means the chartplotter
is now navigating to the point.
6. Press [CLEAR] to switch to the Chart page or Highway page to start navigating to the
point.