Standard Horizon CP1000C - Manual (Page 32)

Page 34 GPS chartplotters
LANGUAGE Default setting is English.
KEY BEEP Allows the beep produced when a key is pressed to be turned on or off.
AUTO INFO By default when the cursor is moved over a buoy, Mark or other item a popup window will show
information of the item. This menu item allows the window to be turned on or off.
TIME LINE Is a line projected from the vessel icon which indicates the distance your vessel will travel at
the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.
CURSOR WINDOW By default when the cursor is moved a window is shown with the lat/lon Distance and bearing
from the vessels location to the cursor. This selection allows the window to be turned off.
ZOOM TYPE The default setting changes scales in or out with each press of the ZOOM IN or ZOOM OUT
key. When ZOOM BY SCALE is selected and either the ZOOM IN or OUT key is pressed a
popup window is shown allowing you to choose the scale to zoom to using the ShuttlePoint
knob.
MAP ORIENTATION Selections are:
North Up : The Top of the page is fixed to North
Course Up: The top of the page is orientated to the direction the vessel is heading.
MEASURE DST & BRG When this function is turned on allows a distance to be measured between two points using
the Shuttlepoint knob and [ENTER].
UNITS OF MEASURE Units of Measure can be selected for Distance, Speed, Depth and Altitude.